Macintosh
Instructions [System 8 or higher]- Revised
11/13/2001
|
Please
print this page out for future reference. Before you begin the setup of
your computer for BASIC NEEDS Internet Access, please make sure you have the following information
ready.
- Local Access Number (Click
Here for a list of local access numbers)
- username
- password
If you do not have any of the above please contact
our office at 951-805-0511 or request your information by sending E-mail
to support@basicneeds.net.
|
|

Configure
Remote Access and Browser
1. Click on Apple Control Panel --> TCP/IP
2. Select Connect via PPP
3. Select Configure Using PPP Server
4. Click on the box labeled DNS Configuration
5. Enter 216.126.128.40 in the first line of Name server addr
box
6. Enter 216.126.136.250 in the second line of the Name server addr
box
7. Close the window
8. Click Yes to save changes
9. Click on Apple Control Panel --> Remote Access
10. Enter your username in the box labeled
Name
11. Enter your password in the box labeled
Password
12. Enter your Local Access Number in
the box labeled Number
13. Click on Options
14. Select the tab labeled Protocol
15. Select Use Protocol PPP
16. Check the box labeled Connect automatically when starting TCP/IP
applications
17. Check the box labeled Allow error correction and compression in modem
18. Check the box labeled Use TCP header compression
19. Click OK
20. Close the window
21. Click Yes to save changes
22. Open up Microsoft Internet Explorer to browse the web.
|
|

Optional
Configure
E-mail
1. Open up Outlook Express (Version 5 or above)
2. Click on Tools --> Accounts --> New
3. Enter your name as you would like it to be displayed when people
receive E-mail from you under Full Name. (Ex. John Doe)
6. Select I already have an e-mail address that I would like to use
and enter your BASIC NEEDS E-mail
address under E-mail address (ex. jdoe@basicneeds.net)
7. Select POP as your incoming mail server type from the selection
box
8. Enter basicneeds.net as Incoming mail server
9. Enter basicneeds.net as Outgoing mail server
10. Enter your assigned email username under
Account ID
11. Enter your assigned email password under
password
11. Enter your basicneeds.net E-mail address
under Account name
10. Click FINISH
to save. Close the window
12. To check for new mail click Send/Recv
|
| After
you have configured the above steps. You can browse the web by opening
up Internet Explorer and using your optional E-mail address by opening
up Outlook Express |
|